Optiview’s new modular based solar systems are designed to be installed fixed on a platform, pole or a wall and can be used to power items in areas where shore power is not readily available.
Optiview’s in-house systems designers will pre-build the main components of this system. It will be up to you to install the three primary components and finish the connections.
Rugged Power Core: The marine grade 5052 aluminum enclosure houses the solar batteries, control panel, PoE switch, and is where all the connections terminate.
Solar Panels: Two 100W solar panels with brackets will come pre-assembled for the installer to place for optimum sunlight.
Primary Cabling: The PV Wire connecting the power core and panels will allow for up to 20ft of separation. Optiview provides the primary junction boxes and non-slip termination pieces that are able to be fit with either 1″ flex PVC or 1″ schedule 40 PVC piping. The SM200-300AH comes standard with 3ft of flex PVC conduit for connecting the core and panels.
The AL202222 enclosure that houses the batteries is constructed from 5052 marine grade aluminum which means it is not prone to rust or corrosion like other metal enclosures constructed from steel. All components of this modular, scalable system are rated for the outdoors and will last for years.
Financing available. Click here for more information.
|Batteries||2 x 150AH|
|Industrial PoE Port||12V 8 PoE (10/100Tx) Unmanaged Switch, 30W per port|
|Controller||20Amp Solar Charge Controller|
|Breaker||3 x 20Amps|
|12V Distribution Block||6 Outputs|
|Enclosure Size||20″ x 22″ x 22″|
|Material||5052 Marine Grade Aluminum|
|Cable Access||2 – 1 for primary cabling / 1 for CAT5/6 cabling|
|Panels||2 x 100W Monocrystalline Solar Panels|
|Brackets||2 x Pole Mount Brackets with Hardware|
|PV Solar Wire||20ft PV Wire between Power Core and Solar Panels|
|Flex PVC||3 feet Flex PVC and Connectors|