24 x 10/100Base-TX
2 x GB Uplink + 2 x GB SFP
360W Power over Ethernet
Power Specifications | Power consumption: maximum 390W PoE Power: 360W Voltage: 100 – 240 VAC, 50 -60 Hz |
Network Protocols & Standards | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet |
Network Interface | 24 x 10/100M ports (MDI / MDIX adaptive); ports with PoE features (24) 2 x 10/100/1000M Gigabit copper RJ45 ports (MDI / MDIX adaptive) |
Electromagnetic Radiation | CE mark, commercial FCC Part 15 Class A VCCI Class A C-Tick |
Temperature | Operating: 32° – 104° F (0° – 50° C) Storage: -4° – 158° F (-20° – 70° C) |
Humidity | Operating : Maximum relative humidity 90% without condensation Storage: 95% maximum relative humidity, non-condensing |
Altitude | Working: Up to 10,000 feet (3,000 meters) Storage: The largest 10,000 feet (3,000 meters) |
LEDs | Each device: power light Each device: WEB indicator Per port (10/100 and Gigabit): connection speed indicator Per PoE port: PoE power-on LED |
Radiation/Electormagnetic Immunity | EN 55024 |
Certifications | CE, FCC, RoHS |
Performance | Forwarding modes: Store and forward Bandwidth: 8.8 Gbps (non-blocking) network latency: 100 Mbps to 100 Mbps transmission, storage and forwarding mode under a 64-byte frame delay is less than 20 microsecondsMean failure interval (MTBF): 300,000 hours (about 34 years) |
User Interface | through WEB browser interface management |
Dimensions | 17.3″ x 11.4″ x 1.7″(440 x 290 x 44 mm) |
Weight | 12.13 lbs (5.5 kg) |
Warranty | 1 Year |
The 24-Port unmanaged PoE swithc with 24 x 100Mbsp RJ45 PoE ports and 2 Gigabit combo reduces equipment and installation costs by delivering data and power over existing CAT5 Ethernet cables to Power over Ethernet (PoE) enabled devices such as access points and IP cameras.
Boost efficiency and reduce network congestion with the total switching capacity of 8.8Gbps. The OVPOE24-400 has LED indicators to display device status for easy power management and troubleshooting. An internal power supply delivers 15.4 Watts to each PoE port. A convenient On / Off button is located on the back of the switch.
Non PoE devices can connect to the switch; Auto-sensing PoE technology cuts power to non-PoE connected devices. Use a PoE splitter with the OVPOE24-400 to install non-PoE devices in remote area.
The OVPOE24-360 PoE switch provides power for regular IP cameras, and IP PTZ cameras, as well as VOIP, and other data and infrastructure. 10/100M speeds ensure high definition video quality. 2 additional 10/100/1000M Gigabit network ports are available.
The maximum output power of 360W enable users to connect up to 24 Ethernet or Fast Ethernet devices and up to 24 IP-based 802.3af devices power supply. PoE optimizes the installation and power management of wireless access point, VoIP phones and IP surveillance camera. PoE (IEEE 802.3af) reduces time and cost in installation for many new-type IP devices. Using one standard CAT5 cable can free your wireless AP and IP camera from power line. If you use UPS to supply power for your switch, your all PoE devices will obtain continuous power supply.
This series of switches for small and medium-sized enterprises provides more advanced security features, including:
24 x 10/100Base-TX
2 x GB Uplink + 2 x GB SFP
370W Power over Ethernet
16 x 10/100Base-TX
2 x GB Uplink + 2 x GB SFP
250W Power over Ethernet
2 Door Add-On Slave
Access Control Panel
Integrated Access Control
1,400 Voltage-Amps
Automatic Voltage Regulation
5 mins. Back-up (Full Load)