AP5G4 – A Pair of 5G Long Range PTP 867Mbps Wireless Bridge

867 Mbps Wireless Speed
2.17mi Wireless Range
4.92GHz to 5.92GHz Frequency Range
PoE Support / Gigabit RJ45 Port

Login to view price
SKU: AP5G4
CATEGORIES: CCTV Accessories
2 + miles of transmission for wireless bridges or access points

FEATURES

  • Simple to Set Up and Easy to Use
  • Indoor or Outdoor Applications
  • Password Protected
  • 5GHz Frequency Range
  • IP65 Weatherproof
High Power, More Range

Optiview’s AP5G4 can power up to 25dBm, equipped with 14dBi panel antenna, the point-to-point wireless range up to 3.5KM distance.

OVERVIEW

Optiview’s AP5G4 is an 11ac Wave2.0 standard high power industrial 5.8G outdoor CPE. It complies with the next generation 802.11ac Wi-Fi standard, MU-MIMO, Qualcomm Chipset, combined 867Mbps high speed in 5.8G, equipped with a Gigabit RJ45 port and PoE support, making this wireless device perfect of installation all over the world for long-range PTP/PTMP application.

867Mbps Data Rate & Gigabit WAN/LAN Ports

The AP5G4 features 802.11ac Wi-Fi and 2*2 MIMO technology, 867Mbps wireless speed. Equipped with Gigabit Ethernet port ensures high-speed internet access and more end users’ access.

5GHz Frequency, More Channels, Lower Latency, Higher Stability

Utilizing a 4.92GHz to 5.92GHz frequency range, avoid the same frequency interference problem, full meet with data transmission in fast speed, low delay, high stability requirement in wireless security or data transmission.

AP5G4 - Product Image - Open

EASY TO INSTALL

Power over Ethernet

Optiview’s AP5G4 has an integrated active 48V Power over Ethernet (PoE), for easy installation and lower cost. This wireless bridge can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.

If a PoE injector is needed, use the AP5G4-INJ model.

APPLICATIONS

Provide building-to-building connectivity with these long range, high transmission wireless devices that can be used as wireless bridges, repeaters, or access points. Connect to cameras or other devices that are off of the main building.

Wireless Access Point from Building to Building
Multi-Building Connectivity
Perimeter Protection with Wireless Access Points
Hardware
ChipsetQualcomm QCA9563+QCA9886+QCA8334
Standard802.11ac/a/n, MU-MIMO technology
Memory128MB DDR2 RAM
Flash 16MBInterface 1 * 10/100/1000Mbps RJ45 WAN Port, 48V POE input support 1 * 10/100/1000Mbps RJ45 LAN Port
1 * Reset button
1 * DC Jack
1 * AP/Repeater operation mode switch
AntennaBuild in 14dBi MIMO Panel Antenna
Power Supply802.3at 48V PoE or DC12V 1.5A
RF Data
Frequency5GHz: 802.11a/ac
5GHz: 4920~5920MHz
Throughput867Mbps
Receive Sensitivity & RF Power
RF Power802.11ac 20MHz BW, MCS0 maximum Tx Power of 24dBm +- 2dBm per chain
802.11ac 20MHz BW, MCS7 maximum Tx Power of 20dBm +- 2dBm per chain
802.11ac 20MHz BW, MCS9 maximum Tx Power of 19dBm +- 2dBm per chain
802.11ac 40MHz BW, MCS0 maximum Tx Power of 24dBm +- 2dBm per chain
802.11ac 40MHz BW, MCS7 maximum Tx Power of 20dBm +- 2dBm per chain
802.11ac 80MHz BW, MCS9 maximum Tx Power of 19dBm +- 2dBm per chain
802.11ac 80MHz BW, MCS0 maximum Tx Power of 24dBm +- 2dBm per chain
802.11ac 80MHz BW, MCS7 maximum Tx Power of 20dBm +- 2dBm per chain
802.11ac 40MHz BW, MCS9 maximum Tx Power of 19dBm +- 2dBm per chain
Receive Sensitivity802.11ac Rx Sensitivity 20MHz BW, MCS9 -62dBm, MCS7 -67 dBm, MCS0 -89 dBm
802.11ac Rx Sensitivity 40MHz BW, MCS9 -61dBm, MCS7 -66 dBm, MCS0 -88 dBm
802.11ac Rx Sensitivity 80MHz BW, MCS9 -60dBm, MCS7 -65 dBm, MCS0 -87 dBm
EVM802.11a: ≤-25dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB
PPM±20ppm
Others
Package Contents867Mbps outdoor PTP
LAN cableInstall Accessory
Environment
Operating Temperature-30~45 ℃
Storage Temperature-40~70 ℃ Humidity: 5%~95% non-condensing;
Product Specific Resources

Data Sheet – AP5GV4

4/18/2022PDF

Installation Guide – How to Connect

06/13/2022PDF